12PCS Lighting Fixtures Cold Rolled Steel Spring Clip Compatible with Panel/Recessed Light and Spotlight Mounting Hole

Material: Cold-rolled steel Surface finish: Nickel-plated Maximum load: 10 lb/4.5 kg Operating temperature: -20 degrees Celsius to +80 degrees Celsius Humidity range: 0-95per cent RH Hole spacing: 17 mm/0.67 in Thickness: 20 mm/0.79 in

• Manufactured from high-quality cold-rolled steel using a single-stage stamping process, the material boasts high density and a uniform internal structure. Each spring can support the weight of several kilograms of lighting fixtures without bending or breaking, even after prolonged suspension.
• The surface is first nickel-plated and then coated with a sealing glaze, providing a double barrier against air and moisture. Even when installed within suspended ceilings in damp environments such as bathrooms and kitchens, rust spots are unlikely to form.
• All edges are rounded or deburred, ensuring that installation by hand will not cause cuts to the fingers, whilst also preventing scratches to the luminaire casing or ceiling finish.
• The spring clip measures 70x20 mm (approx. 2.75x0.8 inches) and has a total thickness of just 20 mm, allowing installation in thin ceilings or joist cavities with a depth of less than 3 cm, offering greater versatility.
• The centre-to-centre distance of the fixing screw holes is 17 mm (approx. 0.67 inches), making them fully compatible with the mounting lug holes on the vast majority of panel lights, recessed spotlights and downlights available on the market, eliminating the need for reaming or repositioning.